Size :566.5 KB
Page{s) : 19
Create Date : May 26, 2011

Transcript of Vulcan-Hart VBS7 ML-138032 Operating instructions

INSTALLATION & OPERATION MANUAL V SERIES FOOD HOLDING & TRANSPORTATION CABINETS AND BANQUET CARTS MODELS: ML-126548 VB90 ML-126550 VB96 ML-126552 VB150 ML-138030 VBP5I ML-126358 VBP7I ML-126359 VBP13I ML-126360 VBP15I ML-138075 VBP33 ML-126361 VBP77I ML-138033 VBS15 ML-138072 VHA9 ML-138073 VHA18 ML-138035 VHDP5 ML-138070 VHFA9 ML-138071 VHFA18 ML-126343 VHP3 ML-126344 VHP7 ML-126345 VHP8 ML-126346 VHP15 ML-126347 VHP20 For additional information on Vulcan-Hart or to locate an authorized parts and service provider in your area, visit our website at www.vulcanequipment.com VULCAN 3600 NORTH POINT BLVD. BALTIMORE, MD 21222 DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC F-41140 (06-11) www.vulcanequipment.com Vulcan (c)2011 All Rights Reserved

V SERIES FOOD HOLDING, TRANSPORT, & BANQUET CARTS F-41140 (06-11) TABLE OF CONTENTS IMPORTANT FOR YOUR SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRICAL REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . 4 OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 HOLDING OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . 6 HOLDING SHUTDOWN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 STAINLESS STEEL CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 SERVICE & PARTS INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 WIRING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 16 WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2

V SERIES FOOD HOLDING, TRANSPORT, & BANQUET CARTS F-41140 (06-11) GENERAL INTRODUCTION If the cabinet is found to be damaged, save the packaging material and Vulcan-Hart Holding & Transport contact the carrier within 15 days of Cabinets and Banquet Carts are delivery. produced with quality workmanship and material. Proper installation, usage, and Carefully unpack and place in a work maintenance of your cabinet will result accessible area as near the installation in many years of satisfactory position as possible. performance. 1. Open the door and carefully It is suggested that you thoroughly read remove any packaging materials this entire manual and carefully follow all and the retaining straps that hold of the instructions provided. the wire plate racks (Banquet Carts) or the tray slides and tray The V Series Holding & Transport slide upright side supports Cabinets and Banquet Carts provide an (Holding & Transport Cabinets). efficient means of transporting and holding bulk prepared foods at proper 2. Peel off vinyl protection film. serving temperatures. 3. On Banquet Carts, lift the plate INSTALLATION racks into position on the side brackets. Before installing, verify that the electrical service agrees with the specifications on 4. On Holding & Transport the rating plate located on the lower Cabinets, remove cardboard back corner of the cabinet. If the supply element cover protector from and equipment requirements do not cabinet bottom. agree, do not proceed with unpacking and installation. Contact your Vulcan- Remove adjustable tray slides Hart Customer Service Department from box. immediately. Remove the tray slide supports UNPACKING: and install them in the cabinet. The Cabinet was inspected before leaving the factory. The transportation a. Hook the openings in the company assumes full responsibility for flat flange of the support safe delivery upon acceptance of the over two vertical carriage shipment. Immediately after unpacking, bolts on the interior of the check for possible shipping damage to cabinet. the cabinet. b. Make sure all flanges on the four supports face the door opening. 3