Size :1.05 MB
Page{s) : 44
Create Date : November 4, 2004

Transcript of Whirlpool ACS088PR0 User's Manual

(R) ROOM AIR CONDITIONERS FOR SLIDER AND CASEMENT WINDOWS Use & Care Guide For questions about features, operation/performance, parts, accessories or service call: 1-800-253-1301. In Canada, call for assistance 1-800-461-5681, for installation and service, call: 1-800-807-6777 or visit our website at... ACONDICIONADORES DE AIRE PARA HABITACION PARA VENTANAS CORREDIZAS O A BISAGRA Manual de Uso y Cuidado Si tiene preguntas respecto a las caracteristicas, funcionamiento, rendimiento, partes, accesorios o servicio tecnico, llame al: 1-800-253-1301 o visite nuestro sito web en... CLIMATISEURS DE PIECE POUR FENETRE COULISSANTE OU A BATTANTS Guide d'utilisation et d'entretien Au Canada, pour assistance composez le : 1-800-461-5681, pour installation ou service, le : 1-800-807-6777 ou visitez notre site web a... Table of Contents/Indice/Table des matieres ...... 2 1188176

AIR CONDITIONER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean: You can be killed or seriously injured if you don't immediately follow instructions. You can be killed or seriously injured if you don't follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions: Plug into a grounded 3 prong outlet. Do not use an extension cord. Do not remove ground prong. Unplug air conditioner before servicing. Do not use an adapter. Use two or more people to move and install air conditioner. SAVE THESE INSTRUCTIONS INSTALLATION REQUIREMENTS Tools and Parts Parts supplied Check that all parts are included in parts package. Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed A BCDE F G here. Tools needed s Pencil J s Flat-blade and Phillips s Level H screwdrivers s Drill s " drill bit L s Tape measure K s Scissors I M N P O A. 1" wood screws (2) G. Leveling bolt L. Filler panel B. " self-tapping screws (4) H. Support platform M. Seals (2) C. " machine screws (2) I. Speed clips (2) N. Foam (2) D. " nuts (2) J. Support angle O. Shorter seal E. " flat washers (2) K. Sliders (2) P. Top retainer F. End cap 3

Parts needed Electrical Requirements s If metal casement window installation, a " (19 mm) wood WARNING filler panel will be needed for opening greater than 15" (39.4 cm) wide. See "Metal or Wood Casement Window Electrical Shock Hazard Installation." Plug into a grounded 3 prong outlet. s If wood casement window installation, a 1" (2.5 cm) wood Do not remove ground prong. frame will be needed. See "Metal or Wood Casement Window Do not use an adapter. Installation." Do not use an extension cord. NOTE: The installation of this air conditioner is intended to be permanent. When installed in an apartment or rental property, Failure to follow these instructions can result in permission to make modifications should be obtained from death, fire, or electrical shock. owner or landlord of building prior to installation of air conditioner. The electrical ratings for your air conditioner are listed on the model and serial number label. The model and serial number Location Requirements label is located on the right-hand side of the cabinet. IMPORTANT: Observe all governing codes and ordinances. Specific electrical requirements are listed in the chart below. Check the location where the air conditioner will be installed. Follow the requirements for the type of plug on the power supply Proper installation is your responsibility. Make sure you have cord. everything necessary for correct installation. The location should provide: Power supply cord Wiring requirements s A horizontal sliding or casement type window with a minimum s 115 volt (103.5 min. - width of 15" (39.4 cm). 126.5 max.) s Grounded electrical outlet within 4 ft (122 cm) of where the s 0-12 amps power cord exits the air conditioner. NOTE: Do not use an extension cord. s 15-amp time-delay fuse or s Free movement of air in room to be cooled. circuit breaker s Adequate window frame assembly and side of structure support for weight of air conditioner. Air conditioner weighs s Use on single outlet circuit approximately 82 lbs (37.2 kg) to 100 lbs (45 kg). only. NOTE: Do not install the air conditioner in an area where the front panel will be exposed to heat sources that will raise the panel Recommended ground method surface temperature above 120F (50C). For your personal safety, this air conditioner must be grounded. Window Installation This air conditioner is equipped with a power supply cord having a grounded 3 prong plug. To minimize possible shock hazard, the Window opening measurements: cord must be plugged into a mating, grounded 3 prong outlet, s 15" (39.4 cm) minimum opening width grounded in accordance with all local codes and ordinances. If a s 22" (55.9 cm) minimum opening height mating outlet is not available, it is the customer's responsibility to have a properly grounded 3 prong outlet installed by a qualified A electrical installer. B It is the customer's responsibility: A. 15" (39.4 cm) minimum B. 22" (55.9 cm) minimum s To contact a qualified electrical installer. s To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 - latest edition, and all local codes and ordinances. Copies of the standards listed may be obtained from: National Fire Protection Association One Batterymarch Park Quincy, Massachusetts 02269 4